From TechnoDocs
(Created page with "=== Scenario === The ready light is not blinking while attempting to enable the controller. You receive one of the two following error boxes: Image:Yellow_estop.jpg '''OR'...") |
(No difference)
|
Revision as of 11:49, 1 September 2011
Scenario
The ready light is not blinking while attempting to enable the controller. You receive one of the two following error boxes:
OR
Problem
The machine is not connected to the PC, or the controller cable is damaged.
Solution
- Ensure the cable that goes between the computer and the control box is secure on both ends.
