From TechnoDocs
| Line 7: | Line 7: | ||
What follows are common inverters over the years, listed in order of recently employed by techno: | What follows are common inverters over the years, listed in order of recently employed by techno: | ||
| − | '''Altivar series inverter:''' | + | '''Altivar series inverter:''' (Used on Techno Routers since ~2008) |
[[File:Altivar.jpg]] | [[File:Altivar.jpg]] | ||
| − | '''Teco (may also bear the name motortronics) Model FM100 inverter:''' | + | '''Teco (may also bear the name motortronics) Model FM100 inverter:''' (Used on Techno routers prior to 2008) |
[[File:Teco.jpg]] | [[File:Teco.jpg]] | ||
Revision as of 12:16, 2 September 2011
The spindle inverters are what provides power and control to high frequency spindles (typically made by HSD, Columbo, and on older machines, Perske).
Porter cable, Kress and Dewalt spindles do not have inverters.
If you are unsure of what type of spindle you have, follow the guide on Finding your spindle
What follows are common inverters over the years, listed in order of recently employed by techno:
Altivar series inverter: (Used on Techno Routers since ~2008)
Teco (may also bear the name motortronics) Model FM100 inverter: (Used on Techno routers prior to 2008)
