From TechnoDocs
(Created page with "If the start stop box is not working properly, it helps to check diagnostics to see if the problem is software or hardware related. * Click Setup * Click Diagnostics [[File:Se...") |
(No difference)
|
Latest revision as of 08:12, 6 September 2011
If the start stop box is not working properly, it helps to check diagnostics to see if the problem is software or hardware related.
- Click Setup
- Click Diagnostics
- Repeatedly press the start and pause buttons and look for blinking inputs.
- For most machines, the input will be red when the button is not pressed and gray when the button is pressed.
- There are multiple places the switch could be hooked up to.
If there is no response from pressing the button whatsoever, there might be a break in a wire or the start stop box might not be connected.