From TechnoDocs
(Created page with "G-Code for the Techno Router must be made to a certain specification. Posts are commonly made by CAM companies for each machine upon request. Techno posts exist for most major ...") |
|||
| Line 4: | Line 4: | ||
Normal Fanuc Gcode works well, if arcs are represented as Incremental IJK. | Normal Fanuc Gcode works well, if arcs are represented as Incremental IJK. | ||
| − | If you are getting circle errors in the previewer, this is likely not to spec. | + | If you are getting [[Previewer errors|circle errors in the previewer]], this is likely not to spec. |
Latest revision as of 12:04, 6 September 2011
G-Code for the Techno Router must be made to a certain specification.
Posts are commonly made by CAM companies for each machine upon request. Techno posts exist for most major software.
Normal Fanuc Gcode works well, if arcs are represented as Incremental IJK. If you are getting circle errors in the previewer, this is likely not to spec.