From TechnoDocs
(Created page with "The brake switch disables the brake that holds the Z motor from falling when the machine is not powered. The brake switch on all modern systems is a 12mm/.5" round black momenta...") |
(No difference)
|
Latest revision as of 12:08, 6 September 2011
The brake switch disables the brake that holds the Z motor from falling when the machine is not powered.
The brake switch on all modern systems is a 12mm/.5" round black momentary pushbutton switch on the front of the control box. On older systems, it is a labeled rocker switch.
When the system is enabled, the brake switch does nothing.
When the system is powered up but disabled, the brake switch disengages the brake.
If a brake motor is getting hot or suffering from position errors, it may be wise to Test the brake.