From TechnoDocs
(Created page with "=== Scenario === You receive an error indicating that the start button is being pressed on startup OR The Start and Pause buttons on your start stop box are not working prope...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 20: | Line 20: | ||
This will set your start stop box mode properly. | This will set your start stop box mode properly. | ||
| − | If | + | On most common machines, the proper mode number is 1 or 5. |
| + | |||
| + | If your start stop box continues to work improperly, ensure proper start stop box operation by going through the procedure in the [[SSB Diagnostics]] page. | ||
Latest revision as of 12:53, 6 September 2011
Scenario
You receive an error indicating that the start button is being pressed on startup
OR
The Start and Pause buttons on your start stop box are not working properly, but in diagnostics, they behave properly.
Problem
The Start Stop Box mode is not set properly.
Solution
- Click Setup
- Click Advanced
- Click Touchpad and Remote
- Click the button for "Test Remote"
- You will be prompted to press the start, then the pause buttons.
This will set your start stop box mode properly. On most common machines, the proper mode number is 1 or 5.
If your start stop box continues to work improperly, ensure proper start stop box operation by going through the procedure in the SSB Diagnostics page.