From TechnoDocs
(taken from the manual) |
|||
| Line 2: | Line 2: | ||
"interchangeable variable block data format for positioning, contouring, and contouring/positioning numerically controlled machines". The standard for this general machine code, known as G/M-Code or, more commonly, G-Code, is EIA-274-D. | "interchangeable variable block data format for positioning, contouring, and contouring/positioning numerically controlled machines". The standard for this general machine code, known as G/M-Code or, more commonly, G-Code, is EIA-274-D. | ||
| − | The Techno CNC [[Control | + | The Techno CNC [[Control software]] is designed to recognize some of the standard G/M codes. The codes it supports can be used to revise an existing G-Code (.NC) file or to create an original file that can be run by the Techno G-Code Interface. The codes that are recognized by the Techno Interface are listed and described in detail in the [[G-code reference]]. Sample G-Code files can be found in the [[G-code examples]] area. |
| + | |||
[[Category:Software]] | [[Category:Software]] | ||
Revision as of 14:09, 1 October 2010
The Electronic Industries Association developed a standard for a code it defines as an "interchangeable variable block data format for positioning, contouring, and contouring/positioning numerically controlled machines". The standard for this general machine code, known as G/M-Code or, more commonly, G-Code, is EIA-274-D.
The Techno CNC Control software is designed to recognize some of the standard G/M codes. The codes it supports can be used to revise an existing G-Code (.NC) file or to create an original file that can be run by the Techno G-Code Interface. The codes that are recognized by the Techno Interface are listed and described in detail in the G-code reference. Sample G-Code files can be found in the G-code examples area.