From TechnoDocs
(added categories) |
(→Standard LC Series Router =) |
||
| Line 1: | Line 1: | ||
The LC Series of machines are light-duty, low cost machines. They can be bundled with a high speed set of electronics that can power through heavier cuts. | The LC Series of machines are light-duty, low cost machines. They can be bundled with a high speed set of electronics that can power through heavier cuts. | ||
| − | == Standard LC Series Router | + | == Standard LC Series Router == |
Standard Sizes: 48x96, 50x50, 59x120, 78x120 | Standard Sizes: 48x96, 50x50, 59x120, 78x120 | ||
Revision as of 15:27, 29 September 2010
The LC Series of machines are light-duty, low cost machines. They can be bundled with a high speed set of electronics that can power through heavier cuts.
Standard LC Series Router
Standard Sizes: 48x96, 50x50, 59x120, 78x120
Low-speed electronics provide rapid speeds of around 250 inches per minute. High speed electronics allow rapid travels between 800 and 1200 inches per minute, and are marketed under the LC+ (LC Plus) name.
Older Versions
LC+ v1.1
Note the different control box in the lower right of this picture. This machine operates at speeds between 800 and 1200 IPM.
LC+ v1.2
Note the different control box. It looks like the regular LC, but is mounted on the inside of the left leg.
