Difference between revisions of "Controller box"

Revision as of 13:39, 1 September 2011

The controller box encloses the control electronics, and provides a safe environment. There are many ways to determine which controller your machine employs.

Note that this list is not exhaustive. Older and less common controllers are not listed here. If you do not see your controller here, obtain any part numbers or markings before contacting support.

*If possible, take a picture of the controller and send it to support@technorouters.com

Types Of Controllers

LC Plus Controller

This is the current LC Plus control box. Note the Blue badge

This is the current LC Plus control board inside the box

This is the PCI Card that will be inside the PC

LC Control Box

This is the current LC (AKA LP) control box. Note the Black badge

This is the current LC control board inside the box

This is the PCI Card that will be inside the PC

Servo Box 1

This is the current MP Control Box

This is the PCI Card that will be inside the PC. NOTE: It is the same card as some other controllers.

Servo Box 2

This is the original RG & LC Plus Control box. It was sold 2007 and earlier.

This is the PCI Card that will be inside the PC. NOTE: It is the same card as some other controllers.

Premium Controller

This is the Premium Class console.

This is the PCI Card that will be inside the PC. NOTE: It is the same card as some other controllers.

You may also narrow down your controller type by the type of motor it is using. Note that this will not necessarily result in a perfect match.

HP Motors go with LC Plus control boxes and Servo box 2 control boxes. LP Motors go with LC control boxes and Servo box 1 control boxes. The amperage is different between LP size motors, please note it (listed on the motor sticker) before contacting tech support.