From TechnoDocs
(Created page with "Runtime Errors are generally caused when a conflict between the Techno CNC Interface and the Windows operating system occur. == '''Runtime Error 6: Overflow''' == '''Cause:'''...") |
|||
| Line 2: | Line 2: | ||
| − | + | '''Runtime Error 6: Overflow''' | |
'''Cause:''' In older versions of the software, this can be caused when G Code calls for a very high tool number (i.e. 253). | '''Cause:''' In older versions of the software, this can be caused when G Code calls for a very high tool number (i.e. 253). | ||
'''Solution:''' Change your toolpath settings to use a lower tool number (i.e. 5) or upgrade to the latest version of the Techno CNC Interface at [http://technorouters.com/control_interface.html] | '''Solution:''' Change your toolpath settings to use a lower tool number (i.e. 5) or upgrade to the latest version of the Techno CNC Interface at [http://technorouters.com/control_interface.html] | ||
Latest revision as of 12:41, 21 February 2013
Runtime Errors are generally caused when a conflict between the Techno CNC Interface and the Windows operating system occur.
Runtime Error 6: Overflow
Cause: In older versions of the software, this can be caused when G Code calls for a very high tool number (i.e. 253).
Solution: Change your toolpath settings to use a lower tool number (i.e. 5) or upgrade to the latest version of the Techno CNC Interface at [1]