From TechnoDocs
(→LC+ v1.1) |
(→LC+ v1.2) |
||
| Line 19: | Line 19: | ||
Note the different control box. It looks like the regular LC, but is mounted on the inside of the left leg. | Note the different control box. It looks like the regular LC, but is mounted on the inside of the left leg. | ||
| − | [[File: | + | [[File:03lcplus1.2.jpg]] |
[[Category:Hardware]] | [[Category:Hardware]] | ||
[[Category:Router]] | [[Category:Router]] | ||
Revision as of 07:28, 1 October 2010
The LC Series of machines are light-duty, low cost machines. They can be bundled with a high speed set of electronics that can power through heavier cuts.
Standard LC Series Router
Standard Sizes: 48x96, 50x50, 59x120, 78x120
Low-speed electronics provide rapid speeds of around 250 inches per minute. High speed electronics allow rapid travels between 800 and 1200 inches per minute, and are marketed under the LC+ (LC Plus) name.
Older Versions
LC+ v1.1
Note the different control box in the lower right of this picture. This machine operates at speeds between 800 and 1200 IPM.
LC+ v1.2
Note the different control box. It looks like the regular LC, but is mounted on the inside of the left leg.
