From TechnoDocs
(→Long Card) |
(→Long Card) |
||
| Line 35: | Line 35: | ||
* Long Card + Riser Card + Ribbon cable kit: | * Long Card + Riser Card + Ribbon cable kit: | ||
::: '''H20T43-PCI403KT''' | ::: '''H20T43-PCI403KT''' | ||
| − | * Long Card upgrade from ISA card: | + | * Long Card Upgrade Kit (upgrade from ISA card to PCI card): |
::: '''H20T43-PCI403UP''' | ::: '''H20T43-PCI403UP''' | ||
Revision as of 08:11, 6 October 2010
The computer card is a PCI or ISA card that connects your computer to the controller mainboard.
Versions
Warning: Make sure to match the correct card with the corresponding mainboard. Mixing the computer card with the wrong mainboard may cause damage to the electronics, the computer card, and/or your computer.
PCI Cards
Short Card
The short card is 5.75 inches long and is designed to work with:
- LP/LC Electronics
- CNC Lathes
- Servo DaVinci machines
- Gantry III machines
- Short card: part # H20T43-PCINT-002
Long Card
The long card is 9.25 inches long, and is designed to work with:
- MP/HP Electronics
- RG+ Servo Box 3
- Premium Class Electronics
- LC Speed Upgrade
- RG machines
- Some Gantry III machines
- Long Card:
- H20T43-PCI403
- Long Card + Riser Card + Ribbon cable kit:
- H20T43-PCI403KT
- Long Card Upgrade Kit (upgrade from ISA card to PCI card):
- H20T43-PCI403UP
PCI Riser Card
- Riser Card Part # H25X00-RISER-01
ISA Card
The ISA card is very old technology, and no longer supported. ISA cards require an ISA slot on the PC motherboard, something most PC's made in this century do not have. Fortunately, you can easily upgrade from the ISA to the PCI card.
An Upgrade kit with the required cards and cables is available (p/n H20T43-PCI403UP). This kit is particularly helpful when a new(er) PC is being installed into a CNC system currently employing ISA technology.
