From TechnoDocs
Revision as of 07:06, 19 September 2010 by Jbeck (Talk | contribs) (moved things around, categorized page, reworded some parts)
The LC Series of machines are light-duty, low cost machines. They can be bundled with a high speed set of electronics that can power through heavier cuts.
Standard LC Series Router =
Standard Sizes: 48x96, 50x50, 59x120, 78x120
Low-speed electronics provide rapid speeds of around 250 inches per minute. High speed electronics allow rapid travels between 800 and 1200 inches per minute, and are marketed under the LC+ (LC Plus) name.
Older Versions
LC+ v1.1
Note the different control box in the lower right of this picture. This machine operates at speeds between 800 and 1200 IPM.
LC+ v1.2
Note the different control box. It looks like the regular LC, but is mounted on the inside of the left leg.
