From TechnoDocs
Revision as of 13:17, 15 October 2010 by Jbeck (Talk | contribs)

Jump to: navigation, search

Scenario

After upgrading the PC used for the machine, nothing seems to work, and although the Techno CNC Interface opens, it does so with errors.

Problem

This is a software/driver issue. The drivers for the PCI controller card require 32-bit Windows® because they will not function in a 64-bit environment.

Solution

At this time, the only solution is to provide the router with a 32-bit Windows PC, either by switching PC's or re-formatting the current PC with 32-bit Windows. See Computer requirements for more info.

PC's with a 64-bit processor can run 32-bit Windows (this means that it's fine if the PC has 64-bit hardware, but you must install a 32-bit version of Windows on it).

Retrieved from "http://www.docs.technorouters.com/index.php?title=Machine_will_not_work_after_PC_upgrade&oldid=1083"