From TechnoDocs
Revision as of 12:08, 21 October 2010 by Jbeck (Talk | contribs) (Created page with "=== SCSI 2 connector, JP2 === {| {{Table (normal)}} !Pin !Function !Pin !Function |- |1 |A1 |26 | -A1 |- |2 |B1 |27 | -B1 |- |3 |I1 |28 | -I1 |- |4 |A2 |29 | -A2 |- |5 |B2 |30 |...")
SCSI 2 connector, JP2
| Pin | Function | Pin | Function |
|---|---|---|---|
| 1 | A1 | 26 | -A1 |
| 2 | B1 | 27 | -B1 |
| 3 | I1 | 28 | -I1 |
| 4 | A2 | 29 | -A2 |
| 5 | B2 | 30 | -B2 |
| 6 | I2 | 31 | -I2 |
| 7 | A3 | 32 | -A3 |
| 8 | B3 | 33 | -B3 |
| 9 | I3 | 34 | -I3 |
| 10 | A4 | 35 | -A4 |
| 11 | B4 | 36 | -B4 |
| 12 | I4 | 37 | -I4 |
| 13 | Analog axis 1 | 38 | Analog axis 1 gnd |
| 14 | Analog axis 2 | 39 | Analog axis 2 gnd |
| 15 | Analog axis 3 | 40 | Analog axis 3 gnd |
| 16 | Analog axis 4 | 41 | Analog axis 4 gnd |
| 17 | E-stop in | 42 | EN1 |
| 18 | Vin | 43 | EN2 |
| 19 | Brake output | 44 | EN3 |
| 20 | Spindle output | 45 | Opto-isolated gnd |
| 21 | +5V | 46 | GND |
| 22 | Home switch axis 1 | 47 | Home switch axis 2 |
| 23 | Home switch axis 3 | 48 | Home switch axis 4 |
| 24 | 49 | Overtravel axis 2 | |
| 25 | Overtravel axis 3 | 50 | Overtravel axis 4 |