From TechnoDocs
Revision as of 14:44, 1 September 2011 by Efeldman (Talk | contribs) (Created page with "=== Scenario === You receive a message that an axis is at the "End of Travel" even though it is not. The axis moves very slowly when jogging, regardless of the speed it is set ...")
Scenario
You receive a message that an axis is at the "End of Travel" even though it is not. The axis moves very slowly when jogging, regardless of the speed it is set to move.
Problem
A Limit switch is damaged, disconnected or not present.
Solution
Checking the limit switch procedure to be completed later. --ESF