From TechnoDocs
Revision as of 10:56, 2 September 2011 by Efeldman (Talk | contribs) (Created page with "One of the following errors are received: File:Axis_lost_pulses.jpg File:Axis_lost_pulses_2.jpg This is a very critical error that can result in a lot of problems: * ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

One of the following errors are received:

Axis lost pulses.jpg

Axis lost pulses 2.jpg

This is a very critical error that can result in a lot of problems:

  • Machine drift
  • Runaway conditions
  • Location problems
  • Cut quality issues

The causes of this problem are (in order of probability):

  • Dust on the encoder (if the environment is dusty)
  • Broken encoder
  • Bent Control Cable pin or damaged cable (LC Plus or Premium electronics only, this is NEVER caused by a bent pin on an LC / LP controller)
  • Nicked or damaged encoder cable wire
Retrieved from "http://www.docs.technorouters.com/index.php?title=Pulses_were_gained_or_lost&oldid=1560"