From TechnoDocs
Revision as of 08:41, 6 September 2011 by Efeldman (Talk | contribs) (Created page with "Checking the air pressure for a toolchanging spindle Locate the air regulator: File:Regulator.jpg The reading on the dial should be between 90 and 105 PSI. If the pressur...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Checking the air pressure for a toolchanging spindle

Locate the air regulator:

Regulator.jpg

The reading on the dial should be between 90 and 105 PSI. If the pressure is below 80 PSI, toolchangers will work intermittently at best.

Retrieved from "http://www.docs.technorouters.com/index.php?title=TC_air&oldid=1649"