From TechnoDocs
Revision as of 09:03, 1 October 2010 by Jbeck (Talk | contribs) (moved out of KB namespace)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Scenario

  • Axis will not move via interface and cannot be moved manually.
  • Receives "M-x Position error, no power to controller. Re-enable controller?", circular error
  • Can jog other axes
  • Customer is probably cutting wood, etc.(lots of debris)

Problem

  • The ball nut is probably jammed-up with debris.

Solution

  • WD-40
  • Hit "E-Stop" and POWER DOWN machine
  • Thread straw from WD-40 can into groove of ball screw and into the ball nut and blow it out with copious amounts of WD-40.
Retrieved from "http://www.docs.technorouters.com/index.php?title=Frozen_axis&oldid=579"