From TechnoDocs
Revision as of 08:51, 4 October 2010 by Jbeck (Talk | contribs) (created page)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This manual will help guide you set up and operate your machine.

Table of Contents (Stepper System)

This section will be filled out later.

Table of Contents (Servo System)

The Techno CNC Control Interface

  1. System Requirements
  2. Installing the PCI Servo Card and Software
  3. Control Interface main screen

Tutorials

  1. Non-Tool Change Tutorial
  2. Set Tool Stand Locations Tutorial
  3. Set Tool Length Offsets Tutorial
  4. Manual Tool Quick-Change Tutorial
  5. Manual Tool Change Tutorial

Explanation of Functions and Terms

  1. CNC Terminology Glossary
  2. File Execution (G-code and SAC)
  3. Spindle and Coolant Controls
  4. Cut Speed and Plunge Speed
  5. Jog Operations and Controls
  6. Goto Position
  7. Toolchange Operation

G-code Commands

  1. Overview
  2. Sample Programs
  3. G-code reference
Retrieved from "http://www.docs.technorouters.com/index.php?title=Software_manual&oldid=720"