From TechnoDocs
Jump to: navigation, search
(→‎Explanation of Functions)
Line 18: Line 18:
 
# [[File execution (servo)|File Execution]] ([[G-code]] and [[SAC]])
 
# [[File execution (servo)|File Execution]] ([[G-code]] and [[SAC]])
 
# [[Spindle and Coolant Controls (servo)|Spindle and Coolant Controls]]
 
# [[Spindle and Coolant Controls (servo)|Spindle and Coolant Controls]]
−
# Cut Speed and Plunge Speed
+
# [[Cut Speed and Plunge Speed controls (servo)|Cut Speed and Plunge Speed]]
 
# Jog Operations and Controls
 
# Jog Operations and Controls
 
# Goto Position
 
# Goto Position

Revision as of 12:50, 7 October 2010

This manual will help guide you set up and operate your servomotor-based CNC router. If you get lost, you can refer to the CNC Terminology Glossary if you have a question about what a term means.

Table of Contents

Start and Setup

  1. System Requirements
  2. Installing the PCI Servo Card and Software

Tutorials

  1. Non-Tool Change Tutorial
  2. Set Tool Stand Locations Tutorial
  3. Set Tool Length Offsets Tutorial
  4. Manual Tool Quick-Change Tutorial
  5. Manual Tool Change Tutorial

Explanation of Functions

  1. Control Interface main screen
  2. File Execution (G-code and SAC)
  3. Spindle and Coolant Controls
  4. Cut Speed and Plunge Speed
  5. Jog Operations and Controls
  6. Goto Position
  7. Toolchange Operation

G-code Commands

  1. Overview
  2. Sample Programs
  3. G-code reference
Retrieved from "http://www.docs.technorouters.com/index.php?title=Control_Software_(servo)&oldid=916"