From TechnoDocs
Revision as of 10:19, 21 October 2010 by Jbeck (Talk | contribs) (Created page with "400px == Inverter Wiring == Here is where we describe the wiring. == Part Numbers == *'''H24G53-MT1073-3''' 3HP HSD Router Set (6000 -18000 RPM) :220V...")
Inverter Wiring
Here is where we describe the wiring.
Part Numbers
- H24G53-MT1073-3 3HP HSD Router Set (6000 -18000 RPM)
- 220V, 3-phase or single phase
- Mounting bracket, vacuum shroud
- Collet wrenches, 1/8", 3/16", 1/4", 5/16", 3/8",
- 1/2" collets, and collet nut.
- H24G53-MT1073-5 5HP HSD Router Set (6000 to 18000 RPM)
- 220V, 3-phase or single phase
- Mounting bracket, vacuum shroud
- Collet wrenches, 1/8", 3/16", 1/4", 5/16", 3/8",
- 1/2" collets, and collet nut.
- H24G53-ES915-5 5HP HSD Automatic Tool Changer (6,000 -18,000RPM)
- 5 HP, 3-phase, 220V
- (440V optional) precision spindle
- 3 tool holders, 5 collets: 1/16", 1/8", 1/4", 3/8", 1/2".
- Spindle cooling blower
- Dust collection shroud, mounting bracket
- Variable speed spindle control
- G-CODE tool changer interface, accommodates
- tool length offsets and software controlled spindle speed controller.
- Also available in 220VAC, single phase or 380-440VAC 3 phase.
- Uses ISO 30 tool holders with ER32 collets.