From TechnoDocs
Revision as of 09:26, 4 January 2011 by Jperetzman (Talk | contribs) (Created page with "{{ManualNavigation (servo)}} {{WIP}} In order to set up parallel A & Z axes with their respective end effectors (e.g. spindle and drill bank), follow the steps below: * Open ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Control Software Manual for Servo Systems
All Software Manuals | Table of Contents (servo)
Note!
This article is a work in progress. Check back later, or call us to speed things along.

In order to set up parallel A & Z axes with their respective end effectors (e.g. spindle and drill bank), follow the steps below:

  • Open the interface.
  • Go to Setup -> System.
  • Enter the correct scale factor for M4.
  • Disable the rotary and lathe options.

This will enable the Touch Off A Zero Position in the Toolchanger Operation window.


Toolchange operations windo.gif

NOTE: Within Setup -> Advanced -> Software Switches, we can check A Pause Retract Relative. This will retract the A axis every time the system is paused while running a file.