From TechnoDocs
(→Download) |
(→Installation) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
=== Installation === | === Installation === | ||
| − | + | Make sure all other applications are closed before attempting to install the Interface. | |
| + | ==== PCI Card ==== | ||
# Turn off your computer and remove the cover. Unplug the power cord. | # Turn off your computer and remove the cover. Unplug the power cord. | ||
# Insert the [[computer card|PCI Servo card]] in a vacant PCI slot and secure with a screw. | # Insert the [[computer card|PCI Servo card]] in a vacant PCI slot and secure with a screw. | ||
# Close the computer. Connect the cable to the Servo card. Power on the computer. | # Close the computer. Connect the cable to the Servo card. Power on the computer. | ||
# When Windows starts it will detect the card and prompt you for drivers. Insert the Servo Interface CD-ROM and check the CD-ROM check-box, then continue. | # When Windows starts it will detect the card and prompt you for drivers. Insert the Servo Interface CD-ROM and check the CD-ROM check-box, then continue. | ||
| + | |||
| + | ==== Software ==== | ||
| + | |||
| + | If you've downloaded the software from the website, simply run the installer and driver setup. Otherwise, follow these steps to run the installer from a CD. | ||
| + | |||
# Explore the CD-ROM and run Setup. Follow the steps to install the interface. | # Explore the CD-ROM and run Setup. Follow the steps to install the interface. | ||
# Explore the CD-ROM and run the “runonce” file by double-clicking on it. When it is finished, close the window. | # Explore the CD-ROM and run the “runonce” file by double-clicking on it. When it is finished, close the window. | ||
# Restart the computer. | # Restart the computer. | ||
| − | + | ||
| + | Start the interface with the “Techno Servo Interface” icon on the Windows Start/Programs menu. | ||
[[Category:Software Manual (servo)]] | [[Category:Software Manual (servo)]] | ||
Latest revision as of 10:26, 8 October 2010
| Control Software Manual for Servo Systems |
| All Software Manuals | Table of Contents (servo) |
Here's how to install the PCI computer card and control software.
Download Software
Visit the Control Interface servo system page. From there, you should download the Full Setup, which will work for both new installations and upgrades.
Installation
Make sure all other applications are closed before attempting to install the Interface.
PCI Card
- Turn off your computer and remove the cover. Unplug the power cord.
- Insert the PCI Servo card in a vacant PCI slot and secure with a screw.
- Close the computer. Connect the cable to the Servo card. Power on the computer.
- When Windows starts it will detect the card and prompt you for drivers. Insert the Servo Interface CD-ROM and check the CD-ROM check-box, then continue.
Software
If you've downloaded the software from the website, simply run the installer and driver setup. Otherwise, follow these steps to run the installer from a CD.
- Explore the CD-ROM and run Setup. Follow the steps to install the interface.
- Explore the CD-ROM and run the “runonce” file by double-clicking on it. When it is finished, close the window.
- Restart the computer.
Start the interface with the “Techno Servo Interface” icon on the Windows Start/Programs menu.