From TechnoDocs
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
Identify your [[Controller box]] | Identify your [[Controller box]] | ||
| − | LC / LP controller box | + | '''LC / LP controller box''' |
| + | |||
Specifically, this PCI card: | Specifically, this PCI card: | ||
| Line 12: | Line 13: | ||
* Try swapping the PCI card to another slot | * Try swapping the PCI card to another slot | ||
| − | All other controllers (LC+ MP, Premium) | + | '''All other controllers (LC+ MP, Premium)''' |
| + | |||
Specifically, this PCI card: | Specifically, this PCI card: | ||
[[File:LC+_PCI_Card.jpg]] | [[File:LC+_PCI_Card.jpg]] | ||
Latest revision as of 12:27, 6 September 2011
Command errors are specific, infrequent communication errors between the Software and the PCI card.
Identify your Controller box
LC / LP controller box
Specifically, this PCI card:
A command error on this box means the issue is anywhere from the PCI bus in the computer through to the control board in the controller box.
- Bent pins on the controller cable are a common cause of this problem.
- Try swapping the PCI card to another slot
All other controllers (LC+ MP, Premium)
Specifically, this PCI card:
- A command error on this controller means the issue is between the PCI card and the computer ONLY.
- No problems with the control cable or control box can cause this issue.
- Try swapping the PCI card to another slot.
- Try using another computer.