From TechnoDocs
(Created page with "Command errors are specific, infrequent communication errors between the Software and the PCI card. Identify your Controller box LC / LP controller box A command error on...") |
|||
| Line 4: | Line 4: | ||
LC / LP controller box | LC / LP controller box | ||
| + | Specifically, this PCI card: | ||
| + | |||
| + | [[File:LC_PCI_Card.jpg]] | ||
A command error on this box means the issue is anywhere from the PCI bus in the computer through to the control board in the controller box. | A command error on this box means the issue is anywhere from the PCI bus in the computer through to the control board in the controller box. | ||
| Line 10: | Line 13: | ||
All other controllers (LC+ MP, Premium) | All other controllers (LC+ MP, Premium) | ||
| + | Specifically, this PCI card: | ||
| + | [[File:LC+_PCI_Card.jpg]] | ||
* A command error on this controller means the issue is between the PCI card and the computer ONLY. | * A command error on this controller means the issue is between the PCI card and the computer ONLY. | ||
Revision as of 12:27, 6 September 2011
Command errors are specific, infrequent communication errors between the Software and the PCI card.
Identify your Controller box
LC / LP controller box Specifically, this PCI card:
A command error on this box means the issue is anywhere from the PCI bus in the computer through to the control board in the controller box.
- Bent pins on the controller cable are a common cause of this problem.
- Try swapping the PCI card to another slot
All other controllers (LC+ MP, Premium)
Specifically, this PCI card:
- A command error on this controller means the issue is between the PCI card and the computer ONLY.
- No problems with the control cable or control box can cause this issue.
- Try swapping the PCI card to another slot.
- Try using another computer.