From TechnoDocs
Revision as of 13:35, 7 October 2010 by Jbeck (Talk | contribs) (moved Control Software (servo-based) to Control Software (servo): convention has become (sevo) or (stepper) and not (servo-based) or (stepper-based).)

Jump to: navigation, search

This manual will help guide you set up and operate your servomotor-based CNC router. If you get lost, you can refer to the CNC Terminology Glossary if you have a question about what a term means.

Table of Contents

Start and Setup

  1. System Requirements
  2. Installing the PCI Servo Card and Software

Tutorials

  1. Non-Tool Change Tutorial
  2. Set Tool Stand Locations Tutorial
  3. Set Tool Length Offsets Tutorial
  4. Manual Tool Quick-Change Tutorial
  5. Manual Tool Change Tutorial

Explanation of Functions

  1. Control Interface main screen
  2. File Execution (G-code and SAC)
  3. Spindle and Coolant Controls
  4. Cut Speed and Plunge Speed
  5. Jog Operations and Controls
  6. Position Display (DRO)
  7. Goto Position
  8. Home position
  9. Zero position
  10. Toolchange Operation

G-code Commands

  1. Overview
  2. Sample Programs
  3. G-code reference
Retrieved from "http://www.docs.technorouters.com/index.php?title=Control_Software_(servo)&oldid=926"