From TechnoDocs
Revision as of 10:52, 24 April 2012 by Efeldman (Talk | contribs) (Created page with " == Plasma Posts for CAM == Use a standard Post processor for CAM software. The techno software interprets standard techno gcode. == Consumable replacement == Replace all cons...")
Plasma Posts for CAM
Use a standard Post processor for CAM software. The techno software interprets standard techno gcode.
Consumable replacement
Replace all consumables at once, make sure the new ones are a matched set, rated for the amperage they will be run at, and installed as per the manufacturer's instructions.
Work lead
Be sure the work lead is attached to the part to cut and not only to the table.