From TechnoDocs
(Created page with "It may be necessary to check to see if an amplifier is enabling. First, find your Controller box On the LC Plus control box: The amplifier status is read out on the badge...") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
First, find your [[Controller box]] | First, find your [[Controller box]] | ||
| − | On the LC Plus control box: | + | '''On the LC Plus control box:''' |
| − | The amplifier status is read out on the badge in the front. Axis 1,2,3,4 have lights. If the light is lit, the amplifier is enabled. | + | * The amplifier status is read out on the badge in the front. Axis 1,2,3,4 have lights. If the light is lit, the amplifier is enabled. |
| − | If no lights are lit, the | + | * If no lights are lit, the problem is likely the transformer. Find a qualified electrician with a multimeter and then [[Contact Support]]. |
| − | If some lights are lit and others are not, the problem is likely the amplifiers. The box will need servicing. [[Contact Support]]. | + | * If some lights are lit and others are not, the problem is likely the amplifiers. The box will need servicing. [[Contact Support]]. |
| − | On Premium Class control box: | + | '''On Premium Class control box:''' |
| − | The amplifiers are blue boxes inside the console. | + | * The amplifiers are blue boxes inside the console. |
| − | Access to the console should only be attempted by a qualified electrician. The control box has multiple high voltage sources. | + | * Access to the console should only be attempted by a qualified electrician. The control box has multiple high voltage sources. |
| − | Once access is granted, there will be 3 or 4 blue boxes with green or red blinking LEDs. | + | * Once access is granted, there will be 3 or 4 blue boxes with green or red blinking LEDs. |
| − | If the LEDS are not lit, there is no power. | + | * If the LEDS are not lit, there is no power. |
| − | If the LEDS are red, there is an error. | + | * If the LEDS are red, there is an error. |
| − | If the LEDS are solid green, that amplifier is enabled and working properly | + | * If the LEDS are solid green, that amplifier is enabled and working properly |
| − | If the LEDS are blinking green, that amplifier is disabled but working properly. | + | * If the LEDS are blinking green, that amplifier is disabled but working properly. |
| − | On the Servo Box 1 and 2: | + | '''On the Servo Box 1 and 2:''' |
| − | The LEDS across the front of the box (horizontally) represent the amplifier status. | + | * The LEDS across the front of the box (horizontally) represent the amplifier status. |
| − | Unlit means the amps are not enabled. | + | * Unlit means the amps are not enabled. |
| − | Lit means the amplifiers are enabled. | + | * Lit means the amplifiers are enabled. |
| − | If some amps are lit and others are not, there is likely a problem with the amplifier. | + | * If some amps are lit and others are not, there is likely a problem with the amplifier. |
| + | |||
| + | '''Amplifier status is not observable on the low power LC control box.''' | ||
Latest revision as of 11:13, 6 September 2011
It may be necessary to check to see if an amplifier is enabling.
First, find your Controller box
On the LC Plus control box:
- The amplifier status is read out on the badge in the front. Axis 1,2,3,4 have lights. If the light is lit, the amplifier is enabled.
- If no lights are lit, the problem is likely the transformer. Find a qualified electrician with a multimeter and then Contact Support.
- If some lights are lit and others are not, the problem is likely the amplifiers. The box will need servicing. Contact Support.
On Premium Class control box:
- The amplifiers are blue boxes inside the console.
- Access to the console should only be attempted by a qualified electrician. The control box has multiple high voltage sources.
- Once access is granted, there will be 3 or 4 blue boxes with green or red blinking LEDs.
- If the LEDS are not lit, there is no power.
- If the LEDS are red, there is an error.
- If the LEDS are solid green, that amplifier is enabled and working properly
- If the LEDS are blinking green, that amplifier is disabled but working properly.
On the Servo Box 1 and 2:
- The LEDS across the front of the box (horizontally) represent the amplifier status.
- Unlit means the amps are not enabled.
- Lit means the amplifiers are enabled.
- If some amps are lit and others are not, there is likely a problem with the amplifier.
Amplifier status is not observable on the low power LC control box.