Amplifier status

It may be necessary to check to see if an amplifier is enabling.

First, find your Controller box

On the LC Plus control box:

• The amplifier status is read out on the badge in the front. Axis 1,2,3,4 have lights. If the light is lit, the amplifier is enabled.
• If no lights are lit, the problem is likely the transformer. Find a qualified electrician with a multimeter and then Contact Support.
• If some lights are lit and others are not, the problem is likely the amplifiers. The box will need servicing. Contact Support.

On Premium Class control box:

• The amplifiers are blue boxes inside the console.
• Access to the console should only be attempted by a qualified electrician. The control box has multiple high voltage sources.
• Once access is granted, there will be 3 or 4 blue boxes with green or red blinking LEDs.
• If the LEDS are not lit, there is no power.
• If the LEDS are red, there is an error.
• If the LEDS are solid green, that amplifier is enabled and working properly
• If the LEDS are blinking green, that amplifier is disabled but working properly.

On the Servo Box 1 and 2:

• The LEDS across the front of the box (horizontally) represent the amplifier status.
• Unlit means the amps are not enabled.
• Lit means the amplifiers are enabled.

• If some amps are lit and others are not, there is likely a problem with the amplifier.

Amplifier status is not observable on the low power LC control box.